Cheap Mens Stop Watch, Steel Wrist Watch, Chinese Brand EBOHR 623623

This stop watch is constructed with a stainless steel case, a quartz glass dial window, a Japanese Cal.YM92 quartz movement and a leather wristband. The face includes three slim indexes, three subdials and a convenient data calendar at 4 o`clock position.

Accessory: specifications and product warranties.

Watch and wipe moisture, sweat or dirt by a soft, dry cloth frequently. It will help to extend the life of case, band and the ring. Leather band: Use a soft, dry cloth wiped off the moisture gently. Do not rub band, so that the band will not fade color or lose its luster.
Normally, 30M(3ATM) waterproof watches are designed to be used in swimming, and diving watches can be used in diving for underwater work. In order to better protect your watch and prolong its using life, we kindly advise you to keep your watch away from water, even if it is waterproof. Please note that no waterproof watch id designed to be used in hot bath or sauna, otherwise an intake of condensation water will be caused, which will damage the components under serious situation. The watch is up to the standard of water resistance by means of waterproof rubber rings mounted at lens, the back and crown. Because of the ageing of these rings as time goes on, they should be replaced regularly as required by their service condition, in order to keep good water resistant function of the watch.
To prevent movement damage caused by the leakage of electrolyte, batteries of quartz watches should be replaced immediately if the hands stop moving or the second hands move at two-second or four-second intervals instead of the normal one-second intervals. In order that your watch will serve you for many trouble-free years, we recommend that you have it checked every 2 to 3 years by our professionals of any member of EBOHR nation-wide service network.

How to Work a Chronograph Watch

1. Hold the watch in one hand with the watch face toward you. The "crown" is on the right side of the watch between two buttons. A crown is a raised button. Pinch the middle crown with your fingers and pull it out as far as it will go. Turn the crown to set the time; the watch hands that originate in the center of the dial display the daily time.
2. Push the middle crown in one stop so it is in the middle position between being flush with the watch and in the position you set the time from. You will see the date and day change on the left-side indicator on the face of your watch. Turn it forward to change the day; turn it backward to change the date.
3. Push the crown flush to the watch case and use the crown in this position to wind the watch.
4. Start the chronograph by pushing the upper button on the right side of the case. This will activate the "second" hand, which is the long hand coming off the hour and minute hands at the center of the watch face. The second hand automatically starts the minute "totalizer," which is located below the date and time dial. The minute totalizer automatically triggers the hour totalizer, which is the dial at the bottom of the watch face.
5. Stop your chronograph by pressing the bottom button once. To reset the totalizers and the second hand, press the bottom button again.